You should never install the Zamp v.2 in an unventilated equipment cabinet with a door or panel because hot air cannot exhaust adequately.ģ) Do not place the Zamp v.2 on carpeting or any other material that could obstruct airflow through the ventilation holes in the bottom of its chassis.Ĥ) Try to avoid stacking the Zamp v.2 tightly between other components because the heat it produces will not dissipate adequately and may cause overheating of the amplifier and the other units. Observe the following ventilation guidelines when installing the Zamp v.2 in a cabinet or other enclosed area:ġ) If you are not using a ventilation fan, allow few inches on each side and above the unit. The Zamp v.2 can generate substantial heat and requires adequate ventilation to prevent overheating and shut down by its thermal protection circuit. Optional accessory parts are available from Parasound to rack mount the Zamp v.2 by itself or alongside another Parasound half width unit. It will fit into a standard 19" wide equipment rack when mounted side-by-side with other Parasound half-width components. Its panel dimensions are one rack space high (1 3/4" or 44 mm) by one-half rack space wide (9 1/2" or 242 mm). Install your Zamp v.2 away from heat sources such as heating ducts and radiators. Before you proceed, locate the serial number on the rear panel or underside of the unit and record it here for future reference: Note: If you are using this spawn and you can review or record it, please send me video link to post it on my website. SpaceCorps XXX v0.2.5 Update 'Finding Anna' is out This is a bit different to some of the previous updates - youve actually got to do stuff, lol Its a mission this time round - a bit of. Save the carton and all of the packing materials in case you ever need to ship your amplifier for repair. The accessory end had a one- or two-speed engine-driven supercharger that might have a second stage with or without an intercooler, the ignition magnetos and. If you notice any, contact your Parasound Dealer immediately. superseded by statute on other grounds see also Fischer v. is a historic Italian Pet B2B company, owner of the Record, Cat&Rina and Acquafriend brands and official distributor of brands such as Julius-K9 and Tetra. Be sure to inspect the unit for any possible shipping damage. violator was a party to the communication or had one partys prior consent to record it. The incredible versatility of the Zamp v.2 allows many connection and configuration options, so please be sure to read this manual thoroughly before you begin installation.Ĭarefully unpack your Zamp v.2, remove the enclosed AC power cord and the sub-mini 2.5 mm trigger connection plug and wire. If Server Two finds an SPF record for the return-paths domain, it searches the SPF. The Parasound Zamp v.2 is designed for a wide variety of applications, including multi-room, multi-zone installations, desktop audio, bedroom or den systems. Congratulations and thank you for your purchase of this precision Parasound audio component.
0 Comments
Leave a Reply. |